SQL Style Guide
https://www.sqlstyle.guide
Last updated
https://www.sqlstyle.guide
Last updated
Use consistent and descriptive identifiers and names.
Make judicious use of white space and indentation to make code easier to read.
Try to use only standard SQL functions instead of vendor specific functions for reasons of portability.
Keep code succinct and devoid of redundant SQL—such as unnecessary quoting or parentheses or WHERE
clauses that can otherwise be derived.
Include comments in SQL code where necessary. Use the C style opening /*
and closing */
where possible otherwise precede comments with --
and finish them with a new line.
CamelCase—it is difficult to scan quickly.
Descriptive prefixes or Hungarian notation such as sp_
or tbl
.
Plurals—use the more natural collective term where possible instead. For example staff
instead of employees
or people
instead of individuals
.
Quoted identifiers—if you must use them then stick to SQL92 double quotes for portability (you may need to configure your SQL server to support this depending on vendor).
Object oriented design principles should not be applied to SQL or database structures.
Keep the length to a maximum of 30 bytes—in practice this is 30 characters unless you are using multi-byte character set.
Names must begin with a letter and may not end with an underscore.
Only use letters, numbers and underscores in names.
Avoid the use of multiple consecutive underscores—these can be hard to read.
Use underscores where you would naturally include a space in the name (first name becomes first_name
).
Avoid abbreviations and if you have to use them make sure they are commonly understood.
Use a collective name or, less ideally, a plural form. For example (in order of preference) staff
and employees
.
Do not prefix with tbl
or any other such descriptive prefix or Hungarian notation.
Never give a table the same name as one of its columns and vice versa.
Avoid, where possible, concatenating two table names together to create the name of a relationship table. Rather than cars_mechanics
prefer services
.
Always use the singular name.
Where possible avoid simply using id
as the primary identifier for the table.
Do not add a column with the same name as its table and vice versa.
Always use lowercase except where it may make sense not to such as proper nouns.
Should relate in some way to the object or expression they are aliasing.
As a rule of thumb the correlation name should be the first letter of each word in the object’s name.
If there is already a correlation with the same name then append a number.
Always include the AS
keyword—makes it easier to read as it is explicit.
For computed data (SUM()
or AVG()
) use the name you would give it were it a column defined in the schema.
The name must contain a verb.
Do not prefix with sp_
or any other such descriptive prefix or Hungarian notation.
The following suffixes have a universal meaning ensuring the columns can be read and understood easily from SQL code. Use the correct suffix where appropriate.
_id
—a unique identifier such as a column that is a primary key.
_status
—flag value or some other status of any type such as publication_status
.
_total
—the total or sum of a collection of values.
_num
—denotes the field contains any kind of number.
_name
—signifies a name such as first_name
.
_seq
—contains a contiguous sequence of values.
_date
—denotes a column that contains the date of something.
_tally
—a count.
_size
—the size of something such as a file size or clothing.
_addr
—an address for the record could be physical or intangible such as ip_addr
.
It is best to avoid the abbreviated keywords and use the full length ones where available (prefer ABSOLUTE
to ABS
).
Do not use database server specific keywords where an ANSI SQL keyword already exists performing the same function. This helps to make code more portable.
To make the code easier to read it is important that the correct complement of spacing is used. Do not crowd code or remove natural language spaces.
Notice that SELECT
, FROM
, etc. are all right aligned while the actual column names and implementation specific details are left aligned.
Although not exhaustive always include spaces:
before and after equals (=
)
after commas (,
)
surrounding apostrophes ('
) where not within parentheses or with a trailing comma or semicolon.
Always include newlines/vertical space:
before AND
or OR
after semicolons to separate queries for easier reading
after each keyword definition
after a comma when separating multiple columns into logical groups
to separate code into related sections, which helps to ease the readability of large chunks of code.
Keeping all the keywords aligned to the righthand side and the values left aligned creates a uniform gap down the middle of query. It makes it much easier to scan the query definition over quickly too.
To ensure that SQL is readable it is important that standards of indentation are followed.
Joins should be indented to the other side of the river and grouped with a new line where necessary.
Subqueries should also be aligned to the right side of the river and then laid out using the same style as any other query. Sometimes it will make sense to have the closing parenthesis on a new line at the same character position as its opening partner—this is especially true where you have nested subqueries.
Make use of BETWEEN
where possible instead of combining multiple statements with AND
.
Similarly use IN()
instead of multiple OR
clauses.
Where a value needs to be interpreted before leaving the database use the CASE
expression. CASE
statements can be nested to form more complex logical structures.
Avoid the use of UNION
clauses and temporary tables where possible. If the schema can be optimised to remove the reliance on these features then it most likely should be.
When declaring schema information it is also important to maintain human readable code. To facilitate this ensure the column definitions are ordered and grouped where it makes sense to do so.
Indent column definitions by four (4) spaces within the CREATE
definition.
Where possible do not use vendor specific data types—these are not portable and may not be available in older versions of the same vendor’s software.
Only use REAL
or FLOAT
types where it is strictly necessary for floating point mathematics otherwise prefer NUMERIC
and DECIMAL
at all times. Floating point rounding errors are a nuisance!
The default value must be the same type as the column—if a column is declared a DECIMAL
do not provide an INTEGER
default value.
Default values must follow the data type declaration and come before any NOT NULL
statement.
Constraints and their subset, keys, are a very important component of any database definition. They can quickly become very difficult to read and reason about though so it is important that a standard set of guidelines are followed.
Deciding the column(s) that will form the keys in the definition should be a carefully considered activity as it will effect performance and data integrity.
The key should be unique to some degree.
Consistency in terms of data type for the value across the schema and a lower likelihood of this changing in the future.
Can the value be validated against a standard format (such as one published by ISO)? Encouraging conformity to point 2.
Keeping the key as simple as possible whilst not being scared to use compound keys where necessary.
It is a reasoned and considered balancing act to be performed at the definition of a database. Should requirements evolve in the future it is possible to make changes to the definitions to keep them up to date.
Once the keys are decided it is possible to define them in the system using constraints along with field value validation.
Tables must have at least one key to be complete and useful.
Constraints should be given a custom name excepting UNIQUE
, PRIMARY KEY
and FOREIGN KEY
where the database vendor will generally supply sufficiently intelligible names automatically.
Specify the primary key first right after the CREATE TABLE
statement.
Constraints should be defined directly beneath the column they correspond to. Indent the constraint so that it aligns to the right of the column name.
If it is a multi-column constraint then consider putting it as close to both column definitions as possible and where this is difficult as a last resort include them at the end of the CREATE TABLE
definition.
If it is a table level constraint that applies to the entire table then it should also appear at the end.
Use alphabetical order where ON DELETE
comes before ON UPDATE
.
If it make senses to do so align each aspect of the query on the same character position. For example all NOT NULL
definitions could start at the same character position. This is not hard and fast, but it certainly makes the code much easier to scan and read.
Use LIKE
and SIMILAR TO
constraints to ensure the integrity of strings where the format is known.
Where the ultimate range of a numerical value is known it must be written as a range CHECK()
to prevent incorrect values entering the database or the silent truncation of data too large to fit the column definition. In the least it should check that the value is greater than zero in most cases.
CHECK()
constraints should be kept in separate clauses to ease debugging.
Object oriented design principles do not effectively translate to relational database designs—avoid this pitfall.
Placing the value in one column and the units in another column. The column should make the units self evident to prevent the requirement to combine columns again later in the application. Use CHECK()
to ensure valid data is inserted into the column.
Splitting up data that should be in one table across many because of arbitrary concerns such as time-based archiving or location in a multi-national organisation. Later queries must then work across multiple tables with UNION
rather than just simply querying one table.
A list of ANSI SQL (92, 99 and 2003), MySQL 3 to 5.x, PostgreSQL 8.1, MS SQL Server 2000, MS ODBC and Oracle 10.2 reserved keywords.
You can use this set of guidelines, or make your own - the key here is that you pick a style and stick to it. To suggest changes or fix bugs please open an or on GitHub.
These guidelines are designed to be compatible with Joe Celko’s book to make adoption for teams who have already read that book easier. This guide is a little more opinionated in some areas and in others a little more relaxed. It is certainly more succinct where contains anecdotes and reasoning behind each rule as thoughtful prose.
It is easy to include this guide in as a part of a project’s code base or reference it here for anyone on the project to freely read—much harder with a physical book.
SQL style guide by is licensed under a . Based on a work at .
Store compliant time and date information (YYYY-MM-DD HH:MM:SS.SSSSS
).
Ensure the name is unique and does not exist as a .
Always use uppercase for the like SELECT
and WHERE
.
Spaces should be used to line up the code so that the root keywords all end on the same character boundary. This forms a river down the middle making it easy for the readers eye to scan over the code and separate the keywords from the implementation detail. Rivers are , but helpful here.
tables—use a specialist product intended for handling such schema-less data instead.